|
B855/700A
Series Dispensers
The B855/700A Series
has been specifically designed to sustain the high-speed production requirements
of three shift operations.
Features
- Patented pulsed
feed wheel control provides highest efficiency when handling thin or
thick stock
- Patented cam follower
design of the rotary table allows continuous single stroke per drop
for smooth operation (B855 only)
- Easy to set up,
load and maintain
- Heavy duty rear
pile support
- Heavy duty 60
VDC servo-motor
- Heavy duty high
speed rotary drop table with servo-motor/encoder controlled position
- Drop table with
tool steel edges mounted in high speed bearings
- Microprocessor
controlled
- Precision servo-motor
control with short circuit protection and over current indicator
- High contrast
20 character X 4 line LCD display
- Fiber optic photo
cells minimize electromagnetic interference
- Program designed
to operate with flighted infeed conveyors
- Policing control
systems available for multiple units on conveyors
- Over length detector
(double detection and correction)
- Optional PLC interface
capabilities - 24 VDC / 110 VAC
- Optional trip
compensation - automatic variable dispense adjustment utilizing encoders
- Special guarding
of drop table area
- Precision dispensing
of product at the set speed
- Timing trip delay
adjustable by 1,000th of a second Minimum product size (L X W): 1.5
X 1.5" / 40 X 40 mm
Specifications
- Minimum product
size - 2 X 2.5" / 63 X 80 mm
- Maximum product
size - 8.5 X 11" / 215 X 280 mm
- Minimum paper
thickness - 0.003" / 0.08 mm
- Maximum card thickness
- 1" / 30mm
- Standard batch
stack height - 1" / 25 mm
- Adjustable magazine
height - 17" / 430 mm
- Model B855
(no drop table) available - 10", 12", 14", 16" / (254mm - 406mm)
- Model B855
(drop table) available - 12", 14", 16" / (304mm - 406mm)
- Maximum drop table
stroke - 9" / 229 mm
- Compressed air
supply required to stack cards on drop table
- 110 volt ± 10
per cent, 60 Hz, 1 phase, maximum 6 amps
- 220 volt ± 10
per cent, 50 Hz, 1 phase, maximum 4 amps
- Noise level -
approximately 85 dB at 1 yard / 1 meter for greeting cards
Maximum Production
Rates
Based on a 4.75" /
120 mm length card with a 1" / 25.4 mm gap
- Batch count 6
- 120 per minute / 43,200 per hour
- Batch count 10
- 82 per minute / 49,200 per hour
- Batch count 12
- 72 per minute / 51,840 per hour
- Batch count 15
- 60 per minute / 54,000 per hour
- Batch count 20
- 47 per minute / 56,400 per hour
- Batch count 25
- 40 per minute / 60,000 per hour
- Batch count 50
- 20 per minute / 60,000 per hour
< back
>
|
